Certified Kubernetes Security Specialist CKS Learning Path

Certified Kubernetes Security Specialist Certificate

Certified Kubernetes Security Specialist CKS Learning Path

With Certified Kubernetes Security Specialist CKS certification, I have recertified the triad of Kubernetes certification. After knowing how to use and administer Kubernetes, the last piece was to understand the security intricacies and CKS preparation does provide you a deep dive into it.

  • CKS is more of an open-book test, where you have access to the official Kubernetes documentation exam, but it focuses more on hands-on experience.
  • CKS focuses on securing container-based applications and Kubernetes platforms during build, deployment, and runtime.
  • Unlike AWS and GCP certifications, you would be required to solve, debug actual problems, and provision resources on a live Kubernetes cluster.
  • Even though it is an open book test, you need to know where the information is.
  • Trust me, if you are not prepared this time is not going to be sufficient.

CKS Exam Pattern

  • CKS exam curriculum includes these general domains and their weights on the exam:
    • Cluster Setup – 10%
    • Cluster Hardening – 15%
    • System Hardening – 15%
    • Minimize Microservice Vulnerabilities – 20%
    • Supply Chain Security – 20%
    • Monitoring, Logging and Runtime Security – 20%
  • CKS exam has been upgraded and requires you to solve 15-20 questions in 2 hours. I got 16 questions.
  • CKS was already upgraded to use the k8s 1.28 version. But it keeps on being upgraded with new Kubernetes versions.
  • You are allowed to open another browser tab which can be from kubernetes.io or other product documentation like Falco. Do not open any other windows.
  • Exam questions can be attempted in any order and don’t have to be sequential. So be sure to move ahead and come back later.

CKS Exam Preparation and Tips

  • I used the courses from KodeKloud CKS for practicing and it would be good enough to cover what is required for the exam.
  • Prepare yourself with the imperative commands as much as you can. This will help cut down the time required to solve half of the questions.
  • Each exam question carries weight so be sure you attempt the exams with higher weights before focusing on the lower ones. So target the ones with higher weights and quicker solutions like debugging ones.
  • CKS exam provides 6-8 different preconfigured K8s clusters. Each question refers to a different Kubernetes cluster, and the context needs to be switched. Be sure to execute the kubectl use context command, which is available with every question and you just need to copy-paste it.
  • Check for the namespace mentioned in the question, to find resources and create resources. Use the -n <namespace>
  • You would be performing most of the interaction from the client node. However, pay attention to the node (master or worker) you need to execute the exams and make sure you return back to the base node.
  • With CKS is important to move the master node for any changes to the cluster kube-apiserver .
  • SSH to nodes and gaining root access is allowed if needed.
  • Read carefully the Information provided within the questions with the mark. They would provide very useful hints in addressing the question and save time. for e.g., namespaces to look into for a failed pod, what has already been created like configmap, secrets, network policies so that you do not create the same.
  • Make sure you know the imperative commands to create resources, as you won’t have much time to create and edit YAML files.
  • If you need to edit further use --dry-run=client -o yaml to get a headstart with the YAML spec file and edit the same.
  • I personally use alias kk=kubectl to avoid typing kubectl

CKS Resources

CKS Key Topics

Cluster Setup – 10%

Cluster Hardening – 15%

System Hardening – 15%

  • Practice CKS Exercises – System Harding
  • Minimize host OS footprint (reduce attack surface)
    • Control access using SSH, disable root and password-based logins
    • Remove unwanted packages and ports
  • Minimize IAM roles
    • IAM roles are usually with Cloud providers and relate to the least privilege access principle.
  • Minimize external access to the network
    • External access can be controlled using Network Policies through egress policies.
  • Appropriately use kernel hardening tools such as AppArmor, seccomp
    • Runtime classes provided by gvisor and kata containers can help provide further isolation of the containers
    • Secure Computing – Seccomp tool helps control syscalls made by containers
    • AppArmor can be configured for any application to reduce its potential host attack surface and provide a greater in-depth defense.
    • PodSecurityPolicies – PSP enables fine-grained authorization of pod creation and updates.
      • Apply host updates
      • Install minimal required OS fingerprint
      • Identify and address open ports
      • Remove unnecessary packages
      • Protect access to data with permissions
    • Exam tip: Know how to load AppArmor profiles, and enable them for the pods. AppArmor is in beta and needs to be enabled using container.apparmor.security.beta.kubernetes.io/<container_name>: <profile_ref>

Minimize Microservice Vulnerabilities – 20%

  • Practice CKS Exercises – Minimize Microservice Vulnerabilities
  • Setup appropriate OS-level security domains e.g. using PSP, OPA, security contexts.
    • Pod Security Contexts help define security for pods and containers at the pod or at the container level. Capabilities can be added at the container level only.
    • Pod Security Policies enable fine-grained authorization of pod creation and updates and is implemented as an optional admission controller.
    • Open Policy Agent helps enforce custom policies on Kubernetes objects without recompiling or reconfiguring the Kubernetes API server.
    • Admission controllers
      • can be used for validating configurations as well as mutating the configurations.
      • Mutating controllers are triggered before validating controllers.
      • Allows extension by adding custom controllers using MutatingAdmissionWebhook and ValidatingAdmissionWebhook.
    • Exam tip: Know how to configure Pod Security Context, Pod Security Policies
  • Manage Kubernetes secrets
    • Exam Tip: Know how to read secret values, create secrets and mount the same on the pods.
  • Use container runtime sandboxes in multi-tenant environments (e.g. gvisor, kata containers)
    • Exam tip: Know how to create a Runtime and associate it with a pod using runtimeClassName
  • Implement pod to pod encryption by use of mTLS
    • Practice manage TLS certificates in a Cluster
    • Service Mesh Istio can be used to establish MTLS for Intra pod communication.
    • Istio automatically configures workload sidecars to use mutual TLS when calling other workloads. By default, Istio configures the destination workloads using PERMISSIVE mode. When PERMISSIVE mode is enabled, a service can accept both plain text and mutual TLS traffic. In order to only allow mutual TLS traffic, the configuration needs to be changed to STRICT mode.
    • Exam tip: No questions related to mTLS appeared in the exam

Supply Chain Security – 20%

  • Practice CKS Exercises – Supply Chain Security
  • Minimize base image footprint
    • Remove unnecessary tools. Remove shells, package manager & vi tools.
    • Use slim/minimal images with required packages only. Do not include unnecessary software like build tools and utilities, troubleshooting, and debug binaries.
    • Build the smallest image possible – To reduce the size of the image, install only what is strictly needed
    • Use distroless, Alpine, or relevant base images for the app.
    • Use official images from verified sources only.
  • Secure your supply chain: whitelist allowed registries, sign and validate images
  • Use static analysis of user workloads (e.g.Kubernetes resources, Docker files)
    • Tools like Kubesec can be used to perform a static security risk analysis of the configurations files.
  • Scan images for known vulnerabilities
    • Aqua Security Trivy & Anchore can be used for scanning vulnerabilities in the container images.
    • Exam Tip: Know how to use the Trivy tool to scan images for vulnerabilities. Also, remember to use the --severity for e.g. --severity=CRITICAL flag for filtering a specific category.

Monitoring, Logging and Runtime Security – 20%

  • Practice CKS Exercises – Monitoring, Logging, and Runtime Security
  • Perform behavioral analytics of syscall process and file activities at the host and container level to detect malicious activities
  • Detect threats within a physical infrastructure, apps, networks, data, users, and workloads
  • Detect all phases of attack regardless of where it occurs and how it spreads
  • Perform deep analytical investigation and identification of bad actors within the environment
    • Tools like strace and Aqua Security Tracee can be used to check the syscalls. However, with a number of processes, it would be tough to track and monitor all and they do not provide alerting.
    • Tools like Falco & Sysdig provide deep, process-level visibility into dynamic, distributed production environments and can be used to define rules to track, monitor, and alert on activities when a certain rule is violated.
    • Exam Tip: Know how to use Falco, define new rules, enable logging. Make use of the falco_rules.local.yaml file for overrides. (I did not get questions for Falco in my exam).
  • Ensure immutability of containers at runtime
    • Immutability prevents any changes from being made to the container or to the underlying host through the container.
    • It is recommended to create new images and perform a rolling deployment instead of modifying the existing running containers.
    • Launch the container in read-only mode using the --read-only flag from the docker run or by using the readOnlyRootFilesystem option in Kubernetes.
    • PodSecurityContext and PodSecurityPolicy can be used to define and enforce container immutability
      • ReadOnlyRootFilesystem – Requires that containers must run with a read-only root filesystem (i.e. no writable layer).
      • Privileged – determines if any container in a pod can enable privileged mode. This allows the container nearly all the same access as processes running on the host.
    • Task @ Configure Pod Container Security Context
    • Exam Tip: Know how to define a PodSecurityPolicy to enforce rules. Remember, Cluster Roles and Role Binding needs to be configured to provide access to the PSP to make it work.
  • Use Audit Logs to monitor access
    • Kubernetes auditing is handled by the kube-apiserver which requires defining an audit policy file.
    • Auditing captures the stages as RequestReceived -> (Authn and Authz) -> ResponseStarted (-w) -> ResponseComplete (for success) OR Panic (for failures)
    • Exam Tip: Know how to configure audit policies and enable audit on the kube-apiserver. Make sure the kube-apiserver is up and running.
    • Task @ Kubernetes Auditing

CKS Articles

CKS General information and practices

  • The exam can be taken online from anywhere.
  • Make sure you have prepared your workspace well before the exams.
  • Make sure you have a valid government-issued ID card as it would be checked.
  • You are not allowed to have anything around you and no one should enter the room.
  • The exam proctor will be watching you always, so refrain from doing any other activities. Your screen is also always shared.
  • Copy + Paste works fine.
  • You will have an online notepad on the right corner to note down. I hardly used it, but it can be useful to type and modify text instead of using VI editor.

All the Best …

Certified Kubernetes Administrator CKA Learning Path

CKA Certificate

Certified Kubernetes Administrator CKA Learning Path

Recertified Certified Kubernetes Administrator CKA certification recently with 91%. After knowing how to use Kubernetes, it was really interesting and intriguing to know Kubernetes internals and how the overall system works.

  • CKA is more of an open-book test, where you have access to the official Kubernetes documentation exam, but it focuses more on hands-on experience.
  • CKA focuses on “The skills required to be a successful Kubernetes Administrator “. It tests the candidate’s ability to do basic installation as well as configuring and managing production-grade Kubernetes clusters.
  • Unlike AWS and GCP certifications, you would be required to solve, debug actual problems, and provision resources on a live Kubernetes cluster.
  • Even though it is an open book test, you need to know where the information is.
  • Trust me, if you are not prepared this time is not going to be sufficient.

CKA Exam Pattern

  • CKA exam curriculum includes these general domains and their weights on the exam:
    • Cluster Architecture, Installation & Configuration – 25%
    • Workloads & Scheduling – 15%
    • Services & Networking – 20%
    • Storage  – 10%
    • Troubleshooting – 30%
  • CKA requires you to solve 24 questions in 3 hours.
  • CKA exam has been upgraded and requires you to solve 15-20 questions in 2 hours. I got 17 questions.
  • CKA was already upgraded to use the k8s 1.28 version. But it keeps on being upgraded with new Kubernetes versions.
  • You are allowed to open another browser tab which can be from kubernetes.io or other product documentation like Falco. Do not open any other windows.
  • Exam questions can be attempted in any order and don’t have to be sequential. So be sure to move ahead and come back later.

CKA Exam Preparation and Tips

  • I used the courses from KodeKloud CKA for practicing and it would be good enough to cover what is required for the exam.
  • Prepare yourself with the imperative commands as much as you can. This will help cut down the time required to solve half of the questions. I was not stretched for time for CKA and had much time to review.
  • Each exam question carries weight so be sure you attempt the exams with higher weights before focusing on the lower ones. So target the ones with higher weights and quicker solutions like debugging ones.
  • CKA exam provides 6-8 different preconfigured K8s clusters. Each question refers to a different Kubernetes cluster, and the context needs to be switched. Be sure to execute the kubectl use context command, which is available with every question and you just need to copy-paste it.
  • Check for the namespace mentioned in the question, to find resources and create resources. Use the -n <namespace>
  • You would be performing most of the interaction from the client node. However, pay attention to the node (master or worker) you need to execute the exams and make sure you return back to the base node.
  • With CKA is important to move the master node for any changes to the cluster kube-apiserver .
  • SSH to nodes and gaining root access is allowed if needed.
  • Read carefully the Information provided within the questions with the mark. They would provide very useful hints in addressing the question and save time. for e.g., namespaces to look into for a failed pod, what has already been created like configmap, secrets, network policies so that you do not create the same.
  • Make sure you know the imperative commands to create resources, as you won’t have much time to create and edit YAML files.
  • If you need to edit further use --dry-run=client -o yaml to get a headstart with the YAML spec file and edit the same.
  • I personally use alias kk=kubectl to avoid typing kubectl

CKA Learning Path

CKA Key Topics

Cluster Architecture, Installation & Configuration – 25%

Workloads & Scheduling – 15%

Services & Networking – 20%

Storage – 10%

Troubleshooting – 30%

  • Practice CKA Exercises – Troubleshooting
  • Evaluate cluster and node logging
  • Understand how to monitor applications
  • Manage container stdout & stderr logs
  • Troubleshoot application failure
  • Troubleshoot cluster component failure
    • Practice Debug cluster for troubleshooting control plane failure and worker node failure.
      • Understand the control plane architecture.
      • Focus on kube-apiserver, static pod config which causes the control panel pods to be referred and deployed.
      • Check pods in kube-system if they are all running. Use docker ps -a command on the node to inspect the reason for exiting containers.
      • Check kubelet service if the worker node is shown not ready
  • Troubleshoot networking

Scheduling

Security

CKA General information and practices

  • The exam can be taken online from anywhere.
  • Make sure you have prepared your workspace well before the exams.
  • Make sure you have a valid government-issued ID card as it would be checked.
  • You are not allowed to have anything around you and no one should enter the room.
  • The exam proctor will be watching you always, so refrain from doing any other activities. Your screen is also always shared.
  • Copy + Paste works fine.
  • You will have an online notepad on the right corner to note down. I hardly used it, but it can be useful to type and modify text instead of using VI editor.

All the Best …

 

Certified Kubernetes Application Developer CKAD Learning Path

Certified Kubernetes Application Developer CKAD Learning Path

After working on Kubernetes for quite some time, it was time to recertify my  Certified Kubernetes Application Developer, and am glad to have cleared it with a score of 89 with minimal preparation.

  • CKAD is more of an open-book test, where you have access to the official Kubernetes documentation exam, but it focuses more on hands-on experience.
  • CKAD focuses on “Using a Kubernetes cluster once already provisioned“. It tests the candidate’s ability to design, build, configure, and expose cloud native applications for Kubernetes.
  • Unlike AWS and GCP certifications, you would be required to solve, debug actual problems, and provision resources on a live Kubernetes cluster.
  • Even though it is an open book test, you need to know where the information is.
  • Trust me, if you are not prepared this time is not going to be sufficient.

CKAD Exam Pattern

  • CKAD exam curriculum includes these general domains and their weights on the exam:
    • Application Design and Build – 20%
    • Application Environment, Configuration and Security – 25%
    • Application Deployment – 20%
    • Services & Networking – 20%
    • Application observability and maintenance – 15%
  • CKAD requires you to solve 16 questions in 2 hours.
  • CKAD was already upgraded to use the k8s 1.28 version. But it keeps on being upgraded with new Kubernetes versions.
  • You are allowed to open another browser tab that can be from kubernetes.io or other product documentation like Falco. Do not open any other windows.
  • Exam questions can be attempted in any order and don’t have to be sequential. So be sure to flag them and move ahead and come back later.

CKAD Exam Preparation and Tips

  • I used the courses from KodeKloud CKAD for practicing and it would be good enough to cover what is required for the exam.
  • Prepare yourself with the imperative commands as much as you can. This will help cut down the time required to solve half of the questions. I was not stretched for time for CKAD and had much time to review.
  • Each exam question carries weight so be sure you attempt the exams with higher weights before focusing on the lower ones. So target the ones with higher weights and quicker solutions like debugging ones.
  • CKAD exam provides 6-8 different preconfigured K8s clusters. Each question refers to a different Kubernetes cluster, and the context needs to be switched. Be sure to execute the kubectl use context command, which is available with every question and you just need to copy-paste it.
  • Check for the namespace mentioned in the question, to find resources and create resources. Use the -n <namespace>
  • You would be performing most of the interaction from the client node. However, pay attention to the node (master or worker) you need to execute the exams and make sure you return back to the base node.
  • SSH to nodes and gaining root access is allowed if needed.
  • Read carefully the Information provided within the questions with the mark. They would provide very useful hints in addressing the question and save time. for e.g. namespaces to look into. for a failed pod, what has already been created like configmap, secrets, network policies so that you do not create the same.
  • Make sure you know the imperative commands to create resources, as you won’t have much time to create and edit YAML files.
  • If you need to edit further use --dry-run=client -o yaml to get a headstart with the YAML spec file and edit the same.
  • I personally use alias kk=kubectl to avoid typing kubectl

CKAD Resources

CKAD Key Topics

Application Design and Build – 20%

Application Environment, Configuration and Security – 25%

Application Deployment – 20%

Services & Networking – 20%

Application observability and maintenance – 15%

CKAD General information and practices

  • The exam can be taken online from anywhere.
  • Make sure you have prepared your workspace well before the exams.
  • Make sure you have a valid government-issued ID card as it would be checked.
  • You are not allowed to have anything around you and no one should enter the room.
  • The exam proctor will always watch you, so refrain from doing other activities. Your screen is also always shared.
  • Copy + Paste works fine.
  • You will have an online notepad on the right corner to note down. I hardly used it, but it can be useful to type and modify text instead of using the VI editor if you are not comfortable with it.

All the Best …